HID H4 PATCH CABLES

>> BACK

 
   

These cables will allow you to remove the existing HID wire harness that currently goes from the HID bulbs to your snowmobile's battery. These patch cables simply plug into the existing ballast on one end and the 3-prong socket from your sled on the other end. Remove the old harness and you're done! This will also allow you to fit everything behind the speedo and into the pod on the Yamaha Apex. This way you are back to the 2 stock connectors if and when you need to pull your headlight pod.

PLEASE NOTE: As of 11/01/2011 all HID kits ordered from www.sledstart.com will have the updated patch cable harnesses and updated ballasts included along with the traditional harness to the battery. You will NOT need to order the patch cables or ballasts. You will have 2 installation options with the SledStart HID kit. All SledStart harnesses/patch cables will NOT work with non SledStart HID kits. They will only work with the SledStart HID lighting system.

In rare cases depending on the relay used by the snowmobile manufacturer to control the hi-low function on the snowmobile, you may need to update your current ballasts if using the patch cables option for your installation. If you install with the traditional wire harness to the battery, the kit will function on all sleds. If the ballast upgrade is needed for the patch cable install and this is the preferred method you would like to use, SledStart will offer this ballast upgrade at only $54.95 for the set of two ballasts. We have decided instead of increasing the price of the patch cable update and including new ballasts you may not even need, we will just offer the ballast at a discount IF you need them.

If you have any questions about this update please contact us at support@sledstart.com or call us at:
630-792-8910.

If you are updating your existing SledStart HID kit and you prefer to just order the updated ballasts and patch cables, then please order the kit below for $74.95 including both the patch cables and updated ballasts. Or you can order this $20.00 patch cable upgrade and it will come with the set of patch cables only. You can then try the patch cables with your existing ballasts and see if you need the updated ballasts. If you need the updated ballasts and do not wish to pay the extra $54.95 we will be happy to refund the $20.00 for the cables simply by returning them to us.